Field Report Form

Field Report Form

Project Information

Address(Required)

Project Contact & Site Information

System or Product Information

System Information(Required)
Choose all that apply.
Product Information: Finishes
Choose all that apply.
Product Information: Base Coats & Adhesives
Chose all that apply.
Product Information: Meshes, Insulation & Modifiers
Choose all that apply
Product Information: Water Barriers & Flashings
Choose all that apply.

Design Check

Review the plans and field preparations if available.
Sometimes it is needed for deflection or cross grain shrinkage of dimensional lumber. If the structure is moving an expansion joint is needed.
Typically wherever a substrate changes an expansion joint is needed.
This is an industry requirement to shed water
Control joints are a structural element but they are also an aesthetic item and need to be located by the designer. Control joints for stucco are typically placed at 144 square foot maximum areas, 160 square foot for direct applied systems.

Substrates

Substrate Types
Choose all that apply.
Typically a 1/8″ gap is required

Water Barriers & Flashing

If used with system
Water Barrier Types
Check All That Apply, Master Wall Branded Stucco requires two water barriers
Asphalt Felt typically lapped 2″ horzontally and 6″ vertically. Most sheet water barriers require tape.
Sheet water barriers generally have specific requirements
Applies to Rollershield and Trowelshield applications
Windows should be splined or treated with peel and stick to prevent water entry.
The water barrier must be fully integrated with the flashing.
Kick out flashing directs roof water away from the building.
At this point the building should resist any water entry. Note any concerns.
Accessories used with various systems. See specifications.
Drainage Spacers and Vents
Used in rainscreen type applications
EIFS Accessories and Options
Components used directly in the system itself. Check All That Apply
Stucco Accessories and Options
Components used directly in the Master Wall Branded or Unbranded Stucco. Check All That Apply
Direct Applied System Accessories
Stucco Cement Board Coatings, QRW1, Uninsulated Finish System, Soffit System. Check All That Apply

Field Application

Field Application

Aggre-flex EIFS, Rollershield Drainage EIFS, Aggre-flex Drainage EIFS, Stucco Cement Board Coatings, Insulated Concrete Forms (ICF), Commercial Drainage EIFS, QRW1 Drainage EIFS, Uninsulated Finishes, Soffit System, Foam Trims, etc.
Adhesive/Attachment Type
Check All That Apply during Observation
Insulation Board Application
Check All That Apply during Observation
Base Coat and Mesh Applications
Check All That Apply during Observation

Master Wall Stucco Application

OCS Fiberstucco (One Coat Stucco), Cemplaster Stucco
Lath & Accessory Attachment
Check All That Apply During Observation
Varies by Application and Product Selection
Untitled

Finish Application

Untitled

Sealants and Protection (by others)

Sealant Design and Application
Check All That Apply During Observation.
Note protection used and final wall system detailing
Any other open items

Mail Photos to photos@masterwall.com

Use project name in subject line