ACCENT® Stucco Finish is a quality textured finish for traditional stucco bases, One-Coat Stucco (OCS), masonry, or concrete surfaces.

• Stucco Grade Finish available in Standard Acrylic and Elastomeric Plus versions
• Dirt Pickup Resistant (DPR) 100% Acrylic Polymers
• Integrally Colored with 64 Standard Colors
• Durable Aggregate
• Mold/Mildew Resistant
• Easily applied to all stucco surfaces

Quality production grade exterior acrylic primer that helps solidify and protect the stucco surface. Integrally colored Accent Primer helps make finishes brighter and deeper, reduces efflorescence and extends finish coverage rates. Suitable for priming Master Wall® base coats, new stucco, masonry and concrete that has a pH of 13 or less.

Accent Paint is a durable architectural coating formulated with increased durability and film formation. Accent Paint is made for coating an extensive variety of substrates with class leading durability with resistance to blistering, peeling and dirt pickup. Application temperatures may be as low as 38°F (3.3°C).

Class-leading, elastomeric coating designed to bridge hairline cracking in stucco or masonry substrates leaving a durable flat finish. Formulated with 100% pure acrylic elastomeric polymers, Accent Elastomeric Paint dries to a stretchy rubber-like film on the surface yet is vapor permeable.

Hardcoat Mortar is a high-performance, polymer-modified leveling base coat, foam trim adhesive, and base coat for Portland cement stucco. Hardcoat Mortar mixes easily with water; its creamy consistency helps accurate wall surfaces while providing additional weather protection.

Vise Adhesive is manufactured with high-grade aggregates, a pure acrylic emulsion binder, and a field mixed with Type I or I-II Portland cement meeting ASTM C150. Vise Adhesive is intended for use in adhering Expanded Polystyrene (EPS) Insulation Board to an approved substrate or as a base coat or leveling coat over Portland cement stucco, One Coat Stucco, and Brick, masonry, or concrete surfaces.

Base Coat & Adhesive is a high-performance, polymer-modified leveling base coat, foam trim adhesive, and base coat for Portland cement stucco. It mixes quickly with water, and its creamy consistency helps true wall surfaces while providing additional weather protection.

Accent Mesh is a specially woven, glass fiber mesh for reinforcing stucco surfaces and as a reinforcement for foam shapes used with stucco. Accent mesh improves stucco crack resistance when embedded into Accent Base Coats as a leveling and reinforcement component.

Accent LAB is a high-quality 100% acrylic flexible fluid-applied air and water barrier that is easily applied with a roller or spray equipment, but can also be troweled or brushed into place. Accent LAB forms a continuous air and water barrier that protects approved substrates from incidental water damage.

Features & Benefits

• 100% Coverage
• It doesn’t rattle in the wind
• Vapor permeable with low air infiltration rate
• Used as a water barrier and flashing
• Adheres to most common building materials
• Easy to apply, water-based for easy cleanup
• Low VOC

SuperiorShield Accent LAB TG is a high quality 100% acrylic trowel grade flexible air and water barrier. Accent LAB TG can be used for filling large gaps, leveling large areas or where a thicker air/water barrier flashing is needed. Accent LAB TG forms a continuous air and water barrier that protects approved substrates from incidental water damage.

Accent LAB is a high-quality 100% acrylic flexible fluid-applied air and water barrier that is easily applied with a roller or spray equipment, but can also be troweled or brushed into place. Accent LAB forms a continuous air and water barrier that protects approved substrates from incidental water damage.

Features & Benefits

• 100% Coverage
• It doesn’t rattle in the wind
• Vapor permeable with low air infiltration rate
• Used as a water barrier and flashing
• Adheres to most common building materials
• Easy to apply, water-based for easy cleanup
• Low VOC