Division 09 (Stucco)
Cemplaster Fiberstucco System
Master Wall® Cemplaster Fiberstucco System is an engineered, fiber-reinforced stucco that uses our Cemplaster Fiberstucco or Cobrand stucco products in an easy-to-use packaged assembly. Available in concentrate and ready versions, it offers improved durability compared to traditional stucco with easier application, better product consistency, and technical support throughout the application process. Cemplaster Fiberstucco is available as a basic system (stucco & finish), or it can be upgraded with additives, rain-screen mats, continuous insulation leveling base coats, and finishes.
All CIFS® have the following qualities:
- Premium fibered stucco system with a warranty
- Variable warranty options: choose popular additions to customize your system, or let us design one for you
- Up to 20-year limited labor/material warranties available
- Options
- Water barriers (WRB)
- Continuous Insulation (CI)
- Drainage options (DRS)
- Cemplaster Fiberstucco options from 3/8” to 7/8” thick (CFS)
- Reinforcement options (SRM, LBC)
- Finish options (FIN)
OCS Warranty Program
One Coat Stucco (OCS) systems are a durable alternative to traditional stucco, and only Master Wall® offers a comprehensive line of OCS finishes and warranties for these quality products.
Warranties:
- OCS5 – Superior Finishes or Specialty finishes over OCS (5-year*)
- OCS7 – Superior Finishes or Specialty finishes and Primecoat Primer over OCS (7-year*)
- OCS10 – Superior Finishes or Specialty finishes, Primecoat Primer, Master Wall® leveling Base Coat with Bulltec Mesh over OCS (10-year*)
- OCS12 – Superior Finishes or Specialty finishes, Primecoat Primer Master Wall® WeatherSTOP Base Coat with Bulltec Mesh over OCS (12-year*)
*add one year if Superior Elastomeric Plus finishes are used. See the sample warranty for additional information.
Master Wall® Products:
- Superior Finishes are formulated with Dirt-Pickup-Resistant (DPR) polymers. Durable Superior Finishes are available in four textures and endless colors.
- Superior Elastomeric Plus Finishes feature elastomeric polymers to help bridge hairline cracks common in One Coat Stucco while keeping the crisp look of our Superior Finishes.
- Specialty Finishes to meet any need. Choose from ultra-smooth to metallic.
- Primecoat Primer seals the surface and increases the brilliance of the finish.
- Leveling Base Coats help fine-tune the surface of the OCS, making it smoother.
- WeatherSTOP Base Coat waterproofs the surface, helping to stop water penetration into the OCS.
- Bulltec Mesh specializes in reinforcing the OCS surface, adding tensile strength, and helping reduce and control cracking.
MANUFACTURER | OCS5 SYSTEM (5-YEAR) | OCS5 WITH SUPERIOR ELASTOMERIC PLUS (6-YEAR) | OCS7 SYSTEM (7-YEAR) | OCS7 WITH SUPERIOR ELASTOMERIC PLUS (8-YEAR) | OCS10 SYSTEM (10-YEAR) | OCS10 WITH SUPERIOR ELASTOMERIC PLUS (11-YEAR) | OCS12 SYSTEM (12-YEAR) | OCS12 WITH SUPERIOR ELASTOMERIC PLUS (13-YEAR) |
---|---|---|---|---|---|---|---|---|
Amerimix | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Ashgrove | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
EZ Wall | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Quikrete® | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Spec Mix® | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Star R Coat | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Western 1 Kote | OCS5 | OCS5+1 | OCS7 | OCS7+1 | OCS10 | OCS10+1 | OCS12 | OCS12+1 |
Stucco Renovation System
Master Wall Inc.® Stucco Renovation System (SR) renovates and protects existing stucco surfaces. Renovation methods vary and can include a leveling base coat, a waterproof base coat, reinforcing mesh to bridge cracking, Primecoat Primer, and either our Superior, Superior Elastomeric Plus, or specialty finishes.
Features & Benefits:
- Easily Applied
- Suitable for Interior or Exterior
- Class A Fire Rating
Warranty Options
- Base Coat and Superior Finish: 5 years
- Base Coat, Mesh, and Superior Finish: 6 years
- Base Coat, Mesh, Primecoat Primer, and Superior Finish: 7 years
- WeatherStop Base Coat, Mesh, Primecoat Primer, and Superior Finish: 8 years
- Base Coat, Mesh, Primecoat Primer, and Superior Elastomeric Plus Finish: 9 years
- WeatherStop Base Coat, Mesh, Primecoat Primer, and Superior Elastomeric Plus Finish: 10 years.
DETAIL | ADOBE | JPG | CAD DETAIL |
---|---|---|---|
SR-01 Typical Assembly with notes | JPG | DETAIL | |
SR-02 Typical 5-year Application | JPG | DETAIL | |
SR-03 Typical 6-year Application | JPG | DETAIL | |
SR-04 Typical 7-year Application | JPG | DETAIL | |
SR-05 Typical 8-year Application | JPG | DETAIL | |
SR-06 Typical 9-year Application | JPG | DETAIL | |
SR-07 Typical 10-year Application | JPG | DETAIL | |
SR-08 Uncapped Wall Renovation | JPG | DETAIL |
Cemplaster Fiberstucco Structa Lath Systems
CEMPLASTER TWIN TRAC
When looking for a modern interpretation of stucco, look no further than the Cemplaster Twin Trac System. The Structa Wire Corp. Twin Trac lath comes in rolls (not sheets) and installs quickly with significant savings in both material and labor. Teamed with Master Wall® Cemplaster Fiberstucco’s options of a concentrated or ready-mixed version for consistent stucco quality and Superior Finish, it helps bring projects in on time and under budget.
CEMPLASTER MEGA LATH
The Cemplaster Mega Lath System is a full-thickness, fully reinforced, and warranted version of traditional stucco. The Structa Wire Corp. heavy-duty Mega Lath offers significant savings in both material and labor. With Master Wall® Cemplaster Fiberstucco for better crack resistance and Superior Elastomeric Plus Finish to bridge minor hairline cracks, it’s the most durable and best-backed system available.
Stucco Cement Board Coatings
Stucco Cement Board Coatings are applied over a high-strength water-managed National Gypsum® PermaBase® or PermaBase® CI cement board. The system can be applied over continuous insulation, and offers ventilated drainage mat assemblies and SuperShield Rollershield air/water barrier options.
Easier Application
The cement board installs easily over approved framing and substrates using one of two methods: -Over an approved structural sheathing in conditioned northern climates. -Directly to structurally controlled framing in southern climates (below 4000 Heating degrees days) or unconditioned northern climates.
Features and Benefits:
- 5-year standard limited warranty
- Extended warranties to 12-years
- Primecoat Primer helps brighten finishes, improving aesthetics
- SuperiorShield Rollershield Liquid-applied Air/Water Barrier (LAB)
- Three Options to keep buildings dryer: Rollershield-RS, vapor open roll grade / Rollershield-TG, vapor open trowel grade / Rollershield-VB vapor closed roll grade
- Extremely low air and water infiltration properties
- Fully warranted air/water protection
Insulated Concrete Forms (ICF)
Insulated Concrete Forms (ICF) are constructed with insulation boards on the inside and outside. Nothing could be easier than coating the insulation board with Master Wall®.
As a siding option, installing Master Wall® coatings over ICF’s is an easy choice. Forms with buried ties work better than exposed ties, which require an additional layer of insulation board. The Certified Master Wall Independent Applicator rasps the ICF insulation board to level minor irregularities. Master Wall Mesh, Base Coat, and Finish complete the job. Finally, a qualified sealant contractor seals windows, doors, and other openings in the wall.
System installation from exterior to substrate:
Finish
Master Wall Base Coat
Reinforcing Mesh
Uninsulated Finish System
Masonry walls are boring. Jazz it up with Master Wall. The textured finish will update any plain, unpainted masonry.
The installation is as simple as it sounds. The designer specifies a base coat, either F&M or F&M Plus. The Certified Master Wall® Independent Applicator may use a Standard Mesh to help with leveling (but it’s not required). Finally, a Superior Finish is applied to complete the job.
System installation from exterior to substrate:
Finish
Master Wall Base Coat
Reinforcing Mesh
Superior Finishes over Stucco
Stucco has been around for a long time. Master Wall® Inc.’s Superior Finishes improve the look of this time-tested wall cladding.
The generic term “stucco” includes several variations, including traditional three-coat stucco and Master Wall®acrylic modified stucco with improved strength and crack resistance. Typical installations include the stucco, reinforced foam trim aesthetic pieces, and a Master Wall Superior Finish.
Stucco practices vary by region but include a water barrier and metal reinforcement. Designers and specifiers should list ASTM C-926 and ASTM C-1063 as references, select specific installation practices, and locate control joints accordingly. For professional results, the wall should be primed with Master Wall Primecoat and our Superior Finish. For extra durability, specify Superior Elastomeric Finish, designed to bridge the minor cracking common to stucco.
System installation from exterior to substrate:
Finish
Primer Option
Master Wall Base Coat
Waterproof Base Coat Option
Reinforcing Mesh
Soffit System
The Master Wall Inc.® Soffit System application greatly improves the looks of any eave, overhang, canopy, or large soffit. The textured surface and installed system are resistant and durable, yet with an economical cost compared to other soffit alternatives.
Features & Benefits:
- Easy Installation
- Great Aesthetics
- Economical
- Fire-resistant
System Details
System | DETAIL | ADOBE | JPG | CAD DETAIL |
---|---|---|---|---|
SOF-01 | SYSTEM OVERVIEW | JPG | DETAIL | |
SOF-02 | SURFACE MOUNTED CONTROL JOINT | JPG | DETAIL | |
SOF-03 | M TYPE CONTROL JOINT | JPG | DETAIL | |
SOF-04 | TERMINATION WITH ANGLED BEAD | JPG | DETAIL | |
SOF-05 | TERMINATION WITH L-BEAD OR CASING | JPG | DETAIL | |
SOF-06 | TERMINATION WITH BACKWRAP | JPG | DETAIL | |
SOF-07 | TERMINATION WITH MITERED SEALANT JOINT | JPG | DETAIL | |
SOF-08 | SOFFIT VENT | JPG | DETAIL | |
SOF-09 | CHANNEL REVEAL | JPG | DETAIL | |
SOF-10 | BUILDING EXPANSION JOINT | JPG | DETAIL |
ProGUARD® DP & ProGUARD® Panel Coatings
Master Wall® ProGUARD® DP (Drainage Plane) and ProGUARD® Panel Coatings are an inexpensive and attractive finish for the T. Clear Corporation ProGUARD® insulated panels. The panels can be finished in any Master Wall® finish, and the assembly provides high impact and weather resistance.
Find out more about T. Clear at their website.
ProGUARD® DP and ProGUARD® Panels are trademarks of T. Clear Corporation and are used with permission.
Interior Finish System
Over Drywall
Master Wall Inc.® Interior Finish System is an easy-to-use interior finish application that delivers upscale results. The entire palate of Master Wall finishes are available to choose from with exciting Metallic Cote and Vintique accents for a dramatic look.
For Wet Areas
Master Wall Inc.® Interior Finish System for wet areas is a durable application of fiberglass-reinforced weather-resistant base coat and a durable finish coat.