Rollershield Drainage CIFS® Standard

Rollershield Drainage CIFS® Standard is the gold standard system in our industry. Formulated with 100% pure acrylics it exceeds industry standards for impact resistance with excellent water drainage should incidental water enter the system.  This system offers the designer a full spectrum of finish options from our standard Superior Finishes to specialty finishes.

1. Framing and Approved Substrate (by others)
2. Rollershield Liquid-applied Air/Water Barrier (LAB)
3. Vertical notched adhesive and drainage channel
4. Master Wall Insulation Board
5. F&M or MBB Base Coat
6. Standard Mesh minimum
7. Superior Finish

Features & Benefits

• Full choice of CIFS®/EIFS options – Economical to Extravagant
• 99% Drainage Efficiency – Class Leading
• 20+ year service history – Still Finishing Strong
• 10-year limited warranty – Class Standard, more with CIFS® Horizons
• Durable and Efficient SuperiorShield Rollershield Air/Water Barrier – Cost and Value Leader
• Master Wall® Continuous insulation – The Most Options
• Master Wall® Standard Mesh with Medium Impact Resistance – Exceeds the competition

Premium Components

SuperiorShield  Air/Water Barriers

SuperiorShield Rollershield RS, roll or spray applied air/water barrier offers industry leading air and water resistance and is tested to exceed industry air leakage requirements with one of the industry’s best air permeance performance  results at high test pressures.  ASTM E2178 (0.0002 cfm/ft² ), ASTM E2357 (0.003 L/s.m² @ 75 Pa, 0.02 L/s.m² @ 300 Pa).

SuperiorShield Rollershield TG is the trowel grade version of RS with similar performance and a thicker 62 mil application thickness.

SuperiorShield Rollershield VB is the vapor barrier version of the SuperiorShield product line and is vapor impermeable Class 1 Vapor Retarder at 0.07 perms of vapor transmission.

Attachment Options

Master Wall® F&M and MBB are the primary adhesives for this system with a 30-year track record of performance.  Dow® ENERBOND™ or INSTA STIK™ Foam Adhesives may also be used to speed application.

Continuous Insulation Options

Standard and premium options are available, either flat or grooved:

Expanded Polystyrene Wall Specification Grade:  ASTM C578, Type I, 0.90pcf, Type II, 1.35pcf,  Type VIII, 1.15pcf.

Dow® STYROFOAM™ Panel Core 20 ASTM C578, Type X, 1.5pcf.

Owens Corning® Foamular® 250 ASTM Type IV, planed.

Neopor® GPS Insulation Board ASTM C578, Type I, 0.90pcf, minimum density, 10psi

Mesh Options

Medium Impact Resistance is standard with Master Wall® with our Standard Mesh.  Improved mesh resistance is available up to Ultra High Impact Resistance.

The Best Finishes

Our Superior Finish line sets the standard in consistently colored textured finishes but our Specialty Finishes are where we shine.  Whether it’s the subtly mottled limestone look of Aggrelime or our new CIFS® Brick or CIFS® Wood Grain finish options, your building will always look its best while maintaining a continuous insulation.

Master Wall Inc.® Rollershield Drainage CIFS® Details

DATA SHEET CUT AWAY       JPG     3D WAREHOUSE DRAWING